基于有限元法的脉冲负载下高弹联轴器轴向力计算方法

以应用于脉冲柴油机发电机组中的高弹联轴器为研究对象,利用CATIA建立高弹联轴器的三维模型导入到Hyper Mesh中进行有限元网格划分,再将其有限元模型导入ANSYS中进行仿真分析,模拟其橡胶块在脉冲负载作用下的动态性能,对高弹联轴器在柴油机输出扭矩和脉冲负载同时作用时产生的轴向力进行仿真计算。结果表明:高弹联轴器在该工况下产生的轴向力较大,并且橡胶块在受交变应力作用时产生多应力集中点。仿真结果与Rivlin经典理论计算结果有较好的一致性,可为消磁舰船动力装置、消磁电站发电机组等场合下的弹性联轴器的选型设计提供参考。     

反对称铺层碳纤维复合材料圆柱壳的双稳态应力特性

双稳态复合材料可广泛应用于各类可变结构的设计。针对反对称铺层的圆柱壳,利用有限元软件ABAQUS的Standard准静态分析,模拟其双稳态跳变过程和跳回过程,探讨在整个连续过程中圆柱壳上的应力分布情况,以及应力随时间和载荷变化的趋势,从而对该类可变结构的设计起到指导作用。结果表明:该类复合材料圆柱壳跳变过程中最大应力出现在载荷施加点与约束点附近,第二稳态下应力关于板中心呈中心对称分布,最大应力沿板壳对角线出现在四个角内侧附近,而跳回过程中应力由第二稳态下的分布慢慢变为集中在约束点附近。而且整个圆柱壳上的最大应力时刻与最大载荷施加的时刻不重叠,具有滞后性。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

防空预警雷达阵地配置及其物元分析

防空预警雷达阵地配置是防空兵战前决策的重要内容。首先分析了影响和决定防空预警雷达阵地配置的战术因素、生存因素和地形因素,总结了防空预警雷达阵地配置的约束条件,然后依据整体探测效能最优的原则提出了防空预警雷达阵地配置的基本模型,探讨了通过调整约束参数来自动生成方案及控制方案数量的问题,最后运用物元分析法对配置方案的合理性进行了分析评判,并对配置方案进行排序,以辅助指挥员决策。     

Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

A search game on a cyclic graph

There is a finite cyclic graph. The hider chooses one of all nodes except the specified one, and he hides an (immobile) object there. At the beginning the seeker is at the specified node. After the seeker chooses an ordering of the nodes except the specified one, he examines each nodes in that order until he finds the object, traveling along edges. It costs an amount when he moves from a node to an adjacent one and also when he checks a node. While the hider wishes to maximize the sum of the traveling costs and the examination costs which are required to find the object, the seeker wishes to minimize it. The problem is modeled as a two‐person zero‐sum game. We solve the game when unit costs (traveling cost + examination cost) have geometrical relations depending on nodes. Then we give properties of optimal strategies of both players. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A balancing problem for mixed model assembly lines with a paced moving conveyor

We state a balancing problem for mixed model assembly lines with a paced moving conveyor as: Given the daily assembling sequence of the models, the tasks of each model, the precedence relations among the tasks, and the operations parameters of the assembly line, assign the tasks of the models to the workstations so as to minimize the total overload time. Several characteristics of the problem are investigated. A line‐balancing heuristic is proposed based on a lower bound of the total overload time. A practical procedure is provided for estimating the deviation of any given line‐balance solution from the theoretical optimum. Numerical examples are given to illustrate the methodology. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

高性能微处理器TLB的优化设计

虚拟存储是现代微处理器系统必不可少的存储模式。在虚存模式下,虚拟地址到物理地址的变换是流水线中最频繁的核心服务,容易处于决定处理器时钟周期的关键路径上。为加快虚存的访问,现代高性能微处理器实现了一种硬件地址映射结构:转换后援缓冲器(简称TLB);在分析TLB传统的地址映射机制的基础上,提出了基于虚区域和Cache块标记的预验证技术,结果表明该技术优化了TLB的设计,避免了TLB访问时延成为访存的瓶颈。     

基于RS近似算法的医疗诊断知识挖掘

针对医学领域诊断规则挖掘算法中时间和空间复杂性问题,提出一种基于邻域系统的决策表近似算法,用于医疗诊断数据挖掘预处理阶段的数据压缩.该方法以代表元素代替若干相近元素,有效地压缩了原始决策表的对象个数,同时保证决策表本身的判断能力基本不变.实例仿真表明,该算法具有比传统聚类算法更优的性能.     

基于多媒体辅助的高等数学教学模式探究

在对高等数学教学模式构建的理论基础和价值取向分析的基础上,确立了"双主-双线"的教学模式:即在高等数学教学中,发挥教师主要导向作用,体现学生自主学习的主体地位,以师生共同探究、学生自主建构为主线,以现代多媒体和传统媒体的灵活运用为辅线的教学模式.并以此为基础陈述了模式的实施步骤及遵循的原则.